Loctite 7063 GP Cleaner

Product overview

Parts Cleaner - general purpose. For use prior to bonding and sealing applications. Leaves no residue.

LOCTITE SF 7063 is a general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job. It is a solvent-based cleaner and the product leaves no residue.

Featured Properties

• Solvent-based general parts cleaner
• Ideal for use prior to adhesive bonding and sealing applications
• Removal of most greases, oils, lubrication fluids, metal cuttings and fines from all surfaces
• Leaves no residue

Applications

LOCTITE 7063 removes most greases, oils, lubrication fluids and metal cuttings.

Directions for use:

1. Treat surfaces to be cleaned by spraying or wiping surfaces with a solvent soaked paper towel.

2. Wipe surfaces when still wet with a clean cloth to remove all heavy contamination. If necessary, spray surfaces again to allow run-off of product.

3. Repeat cleaning process if necessary.

4. Allow LOCTITE SF 7063 to fully evaporate from parts prior to bonding to avoid solvent entrapment within the bond joint.

5. Apply the Loctite adhesive immediately after drying and assemble bond.

Storage

The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling.

Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.

Material removed from containers may be contaminated during use.