Loctite F246/No 5 Structural Acrylic Adhesive Kit

Product overview

LOCTITE AA F246 is a 2-part "no-mix" structural acrylic adhesive which cures rapidly at room temperature. Loctite AA F246 is a toughened, high viscosity, high strength, modified methacrylate ester, liquid acrylic adhesive system designed for structural bonding. It cures rapidly at room temperature on assembly of the joint.

Featured Properties

• Very fast curing with SF INI5
• High strength
• Ideal for applications involving heavy shock, vibration, stress levels and higher temperatures

Applications

 Involving stress levels, higher temperatures, vibration and heavy shock.

Directions for use:

1. For best performance bond surfaces should be clean and free from grease.

2. To ensure a fast and reliable cure, Activator Ini No.1™ or Ini No.5™ should be applied to one of the bond surfaces and the adhesive to the other surface. Parts should be assembled within 15 minutes.

3. The recommended bondline gap is 0.1 mm. Where bond gaps are large (up to a maximum of 0.5 mm), or faster cure speed is required, Activator Ini No.1™ or Ini No.5™ should be applied to both surfaces. Parts should be assembled immediately (within 1 minute).

4. Excess adhesive can be wiped away with organic solvent.

5. Bond should be held clamped until adhesive has fixtured.

6. Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions).

Storage

Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.

Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties 

Material removed from containers may be contaminated during use. Do not return product to the original container.