Permabond C910 MV Metal Cyanoacrylate Adhesive

Product Overview

PERMABOND 910is the original 100%-methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. PERMABOND 910 will cure to a fixture strength in 10 seconds on most surfaces and strength develops rapidly. The adhesive was designed specifically for the bonding of metal surfaces, and provides excellent bond strength to steel, aluminum and most metal surfaces. The methyl cyanoacrylate will also adhere well to a wide variety of other materials including most plastics and rubbers.

Featured Properties

• Excellent adhesion to metal surfaces
• Fast cure
• Easy to apply and dispense
• No mixing required

Storage

Storage Temperature - 2 to 7°C (35 to 45°F)

Allow adhesive to reach room temperature before opening bottle to prevent condensation inside the bottle which can reduce shelf life.

Surface Preparation

Surfaces should be clean, dry and grease-free before applying the adhesive. Use a suitable solvent (such as acetone or isopropanol) for the degreasing of surfaces. Some metals such as aluminium, copper and its alloys will benefit from light abrasion with emery cloth (or similar), to remove the oxide layer.

Directions for Use

1)Apply the adhesive sparingly to one surface.

2)Bring the components together quickly and correctly aligned.

3)Apply sufficient pressure to ensure the adhesive spreads into a thin film.

4)Do not disturb or re-align until sufficient strength is achieved, normally in a few seconds.

5)Any surplus adhesive can be removed with Permabond CA solvent, nitromethane or acetone.

NB:For difficult or porous surfaces using a Permabond activator is recommended.If bonding polypropylene, polyethylene, PTFE orsilicone, prime first with Permabond Polyolefin Primer(POP).