Prefere 4114 used with appropriate hardeners provides adhesive systems for a wide variety of industrial uses, such as manufacture of furniture (veneering and form bend), interior doors and parquet, as well as in the production of plywood.
Prefere 4114 is especially suited for form bend production and with an appropriate hardener it can be used for gluing of wet veneer. Prefere 4114 is suitable for hot bonding and for use under radio frequency heating conditions. With suitable hardeners it can also be used for cold bonding.
A superb liquid/liquid veneering adhesive system. Prefere 4114 used with Prefere 5219 will give you a fast result from mixing through to cured bond on all veneer hot pressing. Easy mix, easy application and easy clean and a bond quality meeting MR ratings. If Prefere 5219 is too fast, well there are more to choose from.
The wood to be bonded must be of uniform thickness. The surfaces must be free from oil, fat, dust or other deposits.
The adhesive system gives the highest bond strength when the moisture content of the wood is 4-8%. Acceptable bond strength can still be obtained at even higher moisture content.
The hardeners are mixed with Prefere 4114 in a ratio of 100:20 parts by weight (pbw).
Under no circumstances should the hardeners be stored at temperatures below 10°C. It is also recommended to store the hardeners below 20°C. Higher storage temperatures may reduce the shelf life of the product.
Storage temperatures above 25°C are not recommended.
Click the button above to ask a question.
Prefere 5035 is a clear liquid hardener, which is used with Prefere 4535 melamine resin to give a fully weatherproof and structural bond.
Aro-Bond® 693 is a hand applied contact adhesive suitable for a range of internal and external applications.
Aro-Bond® PC22 is a high viscosity, high strength cyanoacrylate adhesive for bonding plastics and rubbers.