The Prefere 4152 is the best seller for all veneering work; whether it is cold press, hot press or form pressing the liquid/powder combination is the most versatile resin system for any workshop.
Prefere 4152 is used for small assembly applications in the furniture industry.It is also suitable for veneering.
With the special hardener Prefere 5603, Prefere 4152 cures exceptionally quickly under radio-frequency with glue-line or stray field heating conditions. Mixed with one of the filled hardeners, Prefere 4152 gives a high viscosity and low-cost glue mix without the separate addition of fillers or extenders.
These mixes are suitable for use in a variety of assembly applications, and in conjunction with low-voltage or radio-frequency heating, for lipping and edge-banding.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
Wood, plywood, laminated plastics should be of uniform thickness.
Prefere 4152 should be mixed with the required hardener – refer to technical data sheet for correct mixing ratios and application procedures.
Store in the original containers in a cool, dry place, at a temperature range of between 5°C and 30°C.
Click the button above to ask a question.
Prefere 5689 is a powder hardener which is mixed with Prefere 4152 and can be used for many wood bonding applications in the furniture and woodworking industry, including veneering, laminating and jointing applications.
Prefere 5600 is a medium speed curing ''summer'' powder hardener which is mixed with Prefere 4152 and can be used for many wood bonding applications in the furniture and woodworking industry, including veneering, laminating and jointing applications.
Prefere 5664 is a filled, all day pot life, powder hardener which is mixed with Prefere 4152 and is used for veneering, laminating and jointing applications.