Best Seller Veneering & Laminating Resin
Prefere 4152 Urea Veneering and Laminating Resin
The Prefere 4152 is the best seller for all veneering work; whether it is cold press, hot press or form pressing the liquid/powder combination is the most versatile resin system for any workshop.
FOR SMALL PACK SIZES OF Prefere 4152, PLEASE ORDER WOODSTIKK uf Kits.
Order a Sample
Click the button below, fill in your details and we’ll put it in the post.
Need help?
Call us on 0117 971 1364 or click the button below.
PRODUCT OVERVIEW
Prefere 4152 is used for small assembly applications in the furniture industry.It is also suitable for veneering.
With the special hardener Prefere 5603, Prefere 4152 cures exceptionally quickly under radio-frequency with glue-line or stray field heating conditions. Mixed with one of the filled hardeners, Prefere 4152 gives a high viscosity and low-cost glue mix without the separate addition of fillers or extenders.
These mixes are suitable for use in a variety of assembly applications, and in conjunction with low-voltage or radio-frequency heating, for lipping and edge-banding.
SIZES AVAILABLE
- 25kg jerrrican
- 250kg barrel
- 1000kg IBC
FOR SMALL PACK SIZES OF Prefere 4152, PLEASE ORDER WOODSTIKK uf Kits.
Featured properties
- Meets requirements of BS1203 (type MR)
- Water resistant
- Can be hot or cold cured
- Cures with radio frequency equipment
PREPARATION AND APPLICATION
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
Wood, plywood, laminated plastics should be of uniform thickness.
Prefere 4152 should be mixed with the required hardener – refer to technical data sheet for correct mixing ratios and application procedures.
Handling and Storage
Store in the original containers in a cool, dry place, at a temperature range of between 5°C and 20°C.
Reviews
There are no reviews for this product.
Questions & AnswersQ&A's
Jon2 Years Ago
Is this suitable for sash window assembly. Whats the waterproof rating?
Ta
Bonita2 Years Ago
Yes the Prefere 4152 is suitable for this. If you take a look at the technical data sheet of the product there are a couple of measurements that point to its waterproof rating.
At the top of page 2 under the Specification section it refers to 'MR' which stands for Moisture Resistance. It then details the BS standards that can be achieved with the Prefere 4152 and each of the hardeners.
George2 Years Ago
We are using 4152 & 5600 to stick laminate to mdf.
How much mix should there be per m2
is it 100-150?
100-150 grams
Bonita2 Years Ago
We recommend a coverage of 150g per sqm to get the best bond
2 Years Ago
Please give ratio of prefere 4152 to hardener 5600 in kg.
Donovan2 Years Ago
Yes sure. It's 100:15
That's 100 resin to 15 hardener parts by weight
Anonymous2 Years Ago
will this product stick to metal
Bonita2 Years Ago
This product isn't suitable for sticking metal.
Downloads
Prefere 4152 Resinwith Powder Hardeners Technical Data Sheet
pdf
Prefere 4152 Resin with 5664 Powder Hardener Technical Data Sheet
pdf
Prefere 4152 Urea Veneering and Laminating Resin Safety Data sheet
pdf
Coverage Calculator
Use our adhesive coverage calculator to find out how much you need for your project.
Based on your m2 you need:
kg of Prefere 4152 Urea Veneering and Laminating Resin.
Including 10% wastage.
1kg of Prefere 4152 Urea Veneering and Laminating Resin covers 8m2. You require enough product to cover m2 including 10% wastage. m2 / 8m2 per kg = kg of product.
Coverage Calculator
Use our adhesive coverage calculator to find out how much you need for your project.
Based on your m2 you need:
kg of Prefere 4152 Urea Veneering and Laminating Resin.
Including 10% wastage.
1kg of Prefere 4152 Urea Veneering and Laminating Resin covers 8m2. You require enough product to cover m2 including 10% wastage. m2 / 8m2 per kg = kg of product.
