Prefere 5353 is a hardener used with Prefere 4152 by the separate application method. This system provides a gap-filling, water resistant adhesive which is highly resistant to moulds, fungi etc. Prefere 5353 can also be used with Aerolite UP4145 to speed up the cure.
To make application easier, resin and hardener may be transferred to small plastic or glass containers - not metal containers. Prefere 4152 and hardener 5353 are applied by the following method: 1. Spread the resin, by means of a conventional glue spreader, wooden rod or clean brush, on one of the surfaces to be joined. Leave until tacky. 2. Apply the hardener to the other surface, using a clean brush, felt pad, sponge or similar iron-free applicator. 3. Bring the surfaces together while the hardener-coated surface is still moist and maintain firm contact by any convenient method until the glue has set.
Consult Safety Data Sheet prior to use.
Prefere 5353 should be stored firmly sealed in the original container in a cool (ideally 5 – 20°C) dry place. Shelf life under these conditions is at least 1 year.
Click the button above to ask a question.
The Prefere 4152 is the best seller for all veneering and laminating work. Whether it is cold press, hot press or form pressing the liquid/powder combination is the most versatile resin system for any workshop.
Aerolite UP 4145 is a one-component urea one shot powder adhesive, which only requires mixing with water to make it ready for use. Used for many woodworking applications including veneering, laminating and assembly.
Aro-Bond® 535 is a laminating grade, fast curing, PVA wood adhesive with D3 water resistant characteristics.