Prefere 5600 is a powder hardener which is mixed with Prefere 4152 and can be used for many wood bonding applications in the furniture and woodworking industry, including veneering, laminating and jointing applications.
Mixed with one of the filled hardeners, Prefere 4152 gives a high viscosity and low-cost glue mix without the separate addition of fillers or extenders.
These mixes are suitable for use in a variety of assembly applications, and in conjunction with low-voltage or radio-frequency heating, for lipping and edge-banding.
Image for illustration purposes only. Livery and packaging may vary.
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
Wood, plywood, laminated plastics should be of uniform thickness.
Store in the original containers in a cool, dry place, at a temperature range of between 5°C and 30°C.
Click the button above to ask a question.
Woodstikk® PU Gel D4 is a one component, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel. Cures in 5 minutes.
The Topcutter 2000 has been developed for quick and efficient cutting of seams on the artificial grass in preparation for bonding. The guides of the Topcutter 2000 can easily be adjusted to the width of the artificial grass bac...
Aerotak is a heavy duty aerosol adhesive which gives an exceptionally strong bond for a wide range of demanding uses.
Aro-Bond® 925 is a two component polyurethane, general purpose, water resistant, gap filling adhesive suitable for bonding a wide range of construction materials in both interior and exterior applications.