Ureka | Products | Rosehill Flexilon FX1110 Super Fast Wetpour PU Binder 1

Product overview

Rosehill Flexilon FX1110 binder resin is a fast curing one-component moisture curing polyurethane system designed for binding rubber crumb granules in wet pou applications.

Rosehill Flexilon FX1110 can be used as a binder in the in-situ installation of safety surfaces using Rosehill TPV, EPDM and rubber reclaimed from tyres.

SIZES AVAILABLE

1kg jerrican
5kg jerrican
25kg jerrican
220kg drum
1000kg IBC

featured properties

Good wetting properties towards a range of granules
Fast curing
MDI based
TDI free
Good moisture tolerance
Low viscosity

APPLICATION INSTRUCTIONS

Wet Pour installation is the subject of a further publication. See the Rosehill Polymers Technical Service Bulletin entitled “Wet Pour” for further information on the use of these products in this application.

FLEXILON 1110 based mixtures should not be applied to wet surfaces (i.e. surfaces where there are visible signs of moisture such as damp patches). FLEXILON 1110 can be used after rain when the surface has visibly dried. In very cold or dry conditions a pre-treatment of the rubber with FLEXILON 1117 is recommended. We do not recommend the installation of wet pour at temperatures of less than
5°C.

Yellowing can occur when FLEXILON 1110 is exposed to strong levels of UV light but this does not change its mechanical properties. The yellowing is most evident
with blue rubber granules, which can appear green, grey which can appear yellow and beige, white and cream which can appear yellow. Depending on the weather
conditions, these colour changes can occur within the first hours or days after application. If the level of UV is strong enough then the yellowing process is usually faster during the binder curing process. Over a period of time though, the original colour of rubber granule can return as the thin layer of binder wears off. This depends on the level of foot traffic on the surface.

HANDLING AND STORAGE

Store in a cool, dry place, indoors and avoid unnecessary opening of containers. Do not add any other materials to this product without written permission from the manufacturer. Once opened FLEXILON 1110 will start to cure and a skin will form. Partly used containers should be resealed immediately and re-used as quickly as possible.