Rosehill Flexilon FX1118 binder resin is a medium curing one-component moisture curing polyurethane system designed for binding rubber crumb granules in wet pour applications.
Order a Sample
Click the button below, fill in your details and we’ll put it in the post.
Call us on 0117 971 1364 or click the button below.
Rosehill Flexilon FX1118 binder resin is a medium curing one-component moisture curing polyurethane system designed for binding rubber crumb granules in wet pou applications.
Rosehill Flexilon FX1118 can be used as a binder in the in-situ installation of safety surfaces using Rosehill TPV, EPDM and rubber reclaimed from tyres.
Wet Pour installation is the subject of a further publication. See the Rosehill Polymers Technical Service Bulletin entitled “Wet Pour” for further information on the use of these products in this application.
FLEXILON 1118 based mixtures should not be applied to wet surfaces (i.e. surfaces where there are visible signs of moisture such as damp patches). FLEXILON 1118 can be used after rain when the surface has visibly dried. In very cold or dry conditions a pre-treatment of the rubber with FLEXILON 1117 is recommended. We do not recommend the installation of wet pour at temperatures of less than
Yellowing can occur when FLEXILON 1118 is exposed to strong levels of UV light but this does not change its mechanical properties. The yellowing is most evident
with blue rubber granules, which can appear green, grey which can appear yellow and beige, white and cream which can appear yellow. Depending on the weather
conditions, these colour changes can occur within the first hours or days after application. If the level of UV is strong enough then the yellowing process is usually faster during the binder curing process. Over a period of time though, the original colour of rubber granule can return as the thin layer of binder wears off. This depends on the level of foot traffic on the surface.
Store in a cool, dry place, indoors and avoid unnecessary opening of containers. Do not add any other materials to this product without written permission from the manufacturer. Once opened FLEXILON 1118 will start to cure and a skin will form. Partly used containers should be resealed immediately and re-used as quickly as possible.
Click the button above to ask a question.
Rosehill TPV® Rubber Granules are the ultimate coloured rubber granules for wet pour safety surfaces. Rosehill TPV granules are UV stable and perform in all weather extremes.
Rosehill Flexilon FX1110 binder resin is a fast curing one-component moisture curing polyurethane system designed for binding rubber crumb granules in wet pour applications.
Aro-Bond 9791 is a moisture curing polyurethane based wet pour primer used in the installation of safety surfaces. It is low viscosity, solvent free, single component and based on polyether polyols.
Got an adhesives problem? Let our sticky smarts work for you.
Call us0117 971 1364
Get how-to advice, industry news and new innovations — straight to your inbox.