Tensorgrip F26 DCM Free High Tack Upholstery Adhesive

Product overview

TensorGrip F26 is a multipurpose adhesive, free from Chlorinated products and suitable for a wide range of applications within upholstery manufacturing. With fast flash off and high tack, the TensorGrip F26 truly is a versatile product for bonding Foam, Fabric and other light weight materials to wood based substrates, rigid plastic & metal.

Featured Properties

• Hight Tack
• Fast Flash Off time

Sizes Available

• 500ml aerosol
• 22ltr canister
• 110ltr canister

USE WITH QUIN SPRAY KICK OFF KIT 6

Application

• This product is designed to be applied to two surfaces to be bonded together. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60 °F - 80 °F (16 °C - 27 °C).
• Use with adequate ventilation.
• Prior to use, check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates.

HANDLING & STORAGE

• Consult Safety Data Sheet prior to use.
• DO NOT expose to temperatures exceeding 50°C/122°F.
• Store at temperatures between 10°C and 25°C.
• Avoid exposing aerosol containers to high temperatures or direct sunlight.
• Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources.
• Shake well before use.
• To prevent nozzle from blocking, turn can upside down, press nozzle until spray is clear of adhesive.
• Replace cap after use to protect actuator / valve.
• Use only in a well ventilated area.
• Always test product to determine suitability for your particular application prior to use in production.