Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
Brislington
Bristol
BS4 5JJ

+44 (0)117 971 1364
sales@thenamethatsticks.com

Tensorgrip L17 Hi-Temp Resistant Web Spray Contact Adhesive

Tensorgrip L17 Hi-Temp Resistant Web Spray Contact Adhesive

TensorGrip L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates.

Add to Basket
Available for deliverySpend £400.00 to get free delivery.

Find a stockist

This product is supplied by our valued stockists. To find one near you, please click the button below.

Find a stockist

Need help?

Call us on +44 (0)117 971 1364 or click the button below.

Request a call

Product overview

TensorGrip® L17 is a high performance contact adhesive with a unique resin formula which creates a tough and resilient bond line between decorative surface materials and all common wood substrates. Suitable for bonding HPL, GRP and aluminium to a wide variety of substrates including MDF, chipboard, plywood and many other timber sheet materials and is designed for permanent bonding where immediate bond strength and high heat resistance are required.

featured properties

  • Fast Drying.
  • IMO "WHEELMARK" approved - Certificate number: 164.112/1121/WCL MER0522
  • High Temp Resistance - 120°C.
  • Class-1 Fire Rating.
  • BS 6222 Bond Strength Approval.

Developed For

  • Aluminum
  • FRL
  • FRP/GRP
  • Standard Laminate

 

Application

  • This product is designed to be applied to two surfaces to be bonded together. For best results, the temperature of the adhesive and the surfaces being bonded should be between 60 °F - 80 °F (16 °C - 27 °C).
  • Use with adequate ventilation. When possible we recommend shaking the canister well before using.
  • Attach and secure hose tightly onto the spray gun with required tip. Attach the other end of the hose onto the canister. Make sure the hose-valve connections are securely tight. Open the valve on the canister slowly and fully, check for leaks during this process. Unlock the trigger on the spray gun to start spraying.
  • Prior to use, check compatibility by spraying a small test patch of the adhesive on the substrate. This product may degrade some substrates. 90°

1. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc.

2. Spray about 10-20 cm (4” – 8”) away at a 90 degree angle to the surface, applying a uniform, even coat of adhesive to obtain 80% to 100% coverage of the surface. If necessary, spray another coat of adhesive in areas that appear to need more adhesive.

3. Spray both surfaces to be bonded, one surface vertically and the other surface horizontally. 4. Allow 2 - 3 minutes for the adhesive to tack off until no adhesive transfers to the knuckle when touched.

5. Adhere surfaces and press together with adequate pressure. A roller is recommended to apply a uniform pressure to achieve maximum strength. Allow 24 hours for the adhesive to fully cure.

6. If the spray tip clogs, unscrew the spray tip from the gun and clean with solvent such as lacquer thinner or acetone. Do not use a pin on the spray tip orifice

 

Reviews

There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Click the button above to ask a question.

Downloads

PDF

Tensorgrip L17 NF Spray Contact Adhesive technical data sheet

pdf

Download

PDF

Tensorgrip L17 NF Spray Contact Adhesive safety data sheet canister

pdf

Download

PDF

Tensorgrip L17 NF Spray Contact Adhesive safety data sheet aerosol

pdf

Download

Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us+44 (0)117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.