Turfstikk MS100 MS Polymer Synthetic Grass Adhesive

PRODUCT OVERVIEW

Turfstikk MS100 is high grab so ensures the seaming tape and grass are kept in place while the cure takes place..

Turfstikk MS100 will also bond porous and non-porous substrates including metals, fibreglass, timber, hard plastics, stone, concrete, bricks, plasterboard, ceramics, glass, marble and many other substrates.

SIZES AVAILABLE

290ml cartridge

COVERAGE

(3mm bead) 3 Meters on a 200mm width tape / 30 Linear Meters

Properties

• Fast curing
• Designed for bonding synthetic grass
• Green colour
• Bonds most substrates
• Solvent and water free
• Bonds in damp conditions
• Odourless
• Excellent durability in all atmospheric conditions

Nozzles

• multiiiibead™ MB07 spreader nozzles

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. Most construction grade materials are suitable such as wood, concrete, brick, insulation materials, porous and non-porous.

Slight moistening of substrates improves the curing rate and gap filling properties.

We recommend a preliminary compatibility test before bonding of desired substrates.

The adhesive should be applied within the temperature range of +5°C to +25°C. Cut the tip of the cartridge ensuring the thread is left intact.

Screw nozzle on to the cartridge and cut an aperture relevant to the application requirement. Load the cartridge into a sealant gun and apply the adhesive in beads. Join the parts together within 10 minutes.

Pressing the materials during curing is necessary to obtain the highest bond strength.

Cured adhesive has to be removed mechanically.

Handling and Storage

Consult Safety Data Sheet prior to use.

Turfstikk MS100 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.