Turfstikk MS200 MS Polymer Synthetic Grass Adhesive

PRODUCT OVERVIEW

Turfstikk MS200 is a fast curing, one component, hybrid polymer adheisve designed for bonding artificial grass to seam tape.  Turfstikk MS200 is designed for use with the multiiiibead™ gun to give a fast and effective application method for bonding synthetic grass to seaming tape. Turfstikk MS200 is high grab so ensures the seam tape and grass are kept in place while the cure takes place.

Turfstikk MS200 will also bond porous and non-porous substrates including Metals, Fibreglass, Timber, Hard Plastics, Stone, Concrete, Bricks, Plasterboard, Ceramics, Glass, Marble and many other substrates.

SIZES AVAILABLE

1.5ltr smartfoils (covers up to 3 square metres, or up to 15 linear metres based on a 200mm seam tape)

3ltr smartfoils (covers up to 6 square metres, or up to 30 linear metres based on a 200mm seam tape)

Featured Properties

• Fast curing
• Designed for bonding synthetic grass
• Bonds most substrates
• Solvent and water free
• Bonds in damp conditions
• Odourless
• Excellent durability in all atmospheric conditions

Nozzle required

1 x Free MB01 nozzle included for every 4 x 3ltr smartfoils purchased

multiiiibead Disposable Nozzle

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits. As well as artificial grass, most construction grade materials can be successfully bonded including wood, concrete, brick, insulation materials, porous and non-porous.  Slight moistening of substrates improves the curing rate and gap filling properties.  We recommend a preliminary compatibility test before bonding of desired substrates.

The adhesive should be applied within the temperature range of +5°C to +25°C. When using the multiiiibead™ gun, insert smarfoil into the multiiiibead™ gun barrel and cut tip of sachet. Fix nozzle head to barrel and follow instructions set out in multiiiibead™ gun Instruction Manual. Join the parts together within 10 minutes and clamp for 60 minutes. Pressing the materials during curing is necessary to obtain the highest bond strength.

When bonding wood flooring, position blocks/planks whilst adhesive is still tacky (within 30mins) and tap into final position with mallet and block. Remove uncured adhesive with cleaning wipes. (Caution - test compatibility with lacquer finished block first).

Cured adhesive has to be removed mechanically.

HANDLING AND STORAGE

Consult Safety Data Sheet prior to use.

Turfstikk MS210 should be stored in the original smartfoils in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.