
Turfstikk PU400 is a single component polyurethane based adhesive with high bond strength and high water resistance and is designed for bonding artificial grass.
12 x 310ml Cartridges = 1 box
Find a stockist
This product is supplied by our valued stockists. To find one near you, please click the button below.
Need help?
Call us on 0117 971 1364 or click the button below.
Turfstikk PU400 is a single component polyurethane based adhesive with high bond strength and high water resistance and is designed for bonding artificial grass.
This professional solvent-free adhesive is suitable for small synthetic turf installations and highly recommended when conducting repair works in artificial turf.
Turfstikk PU400 is dispensed by a cartridge gun for easy and efficient application when seaming or repairing the turf.
(3mm bead) 3 Meters on a 200mm width tape / 30 Linear Meters
Apply adhesive with the manual coating machine (Henko 601) or notched trowel evenly on the suitable seaming tape.
Install floor covering during laying time and rub or press down firmly.
Our 1-component adhesive Turfstikk PU400 is best used between +5°C to +30°C. Moisture will benefit the adhesive and will result in a quicker curing time. Beware of too much moisture, we always advise that the adhesive is tested before using it. This way you can prevent using it in an area with too much moisture, which will harm the quality of the adhesive.
Consult Safety Data Sheet prior to use.
Turfstikk PU400 should be stored in the original cartridges in a cool, dry place, at a temperature range of between 5°C and 25°C. In these conditions it has a storage life of at least 12 months.
Great product, especially used on the foam where we weren’t too sure if it would work. Despite the higher moisture content around the foam it has worked very well.
Click the button above to ask a question.
Use our coverage calculator to find out how much you need for your project.
Based on your length in metres:
litres of Turfstikk PU400 Grass Adhesive .
Including 10% wastage.
1 Litre of Turfstikk PU400 Grass Adhesive covers 110 metres with a bead diameter of 3mm. You require enough product to cover metres including 10% wastage. m / 110m per Litre = Litres of product.
Use our coverage calculator to find out how much you need for your project.
Based on your length in metres:
litres of Turfstikk PU400 Grass Adhesive .
Including 10% wastage.
1 Litre of Turfstikk PU400 Grass Adhesive covers 110 metres with a bead diameter of 3mm. You require enough product to cover metres including 10% wastage. m / 110m per Litre = Litres of product.
Got an adhesives problem? Let our sticky smarts work for you.
Call us0117 971 1364
Email ussales@thenamethatsticks.com
Get how-to advice, industry news and new innovations — straight to your inbox.