Woodstikk 10 Wood Floor Adhesive

PRODUCT OVERVIEW

Woodstikk® 10 is a solvent and water free adhesive specifically designed for fixing all types of wooden floors directly onto all common substrates, eliminating the need for battens.   Woodstikk® 10 is used with the multiiiibead™ gun to provide a fast, effective and clean way of dispensing floor adhesive.

Woodstikk® 10 is based on all the latest developments in hybrid polymer technology.

SIZES AVAILABLE

3ltr smartfoil (coverage is up to 6 square metres per sachet)

Nozzle required

1 x Free MB01 nozzle included for every 4 x 3ltr smartfoils purchased

multiiiibead Disposable Nozzle

Featured Properties

• 100% active, solvent and water free - will not cause warpage or curl of wood blocks/ planks
• Permanently flexible -compensates for subfloor movement.
• Will bond directly to all common subfloors, e.g. concrete, wood, metal, ceramic tiles, vinyl, marble, granite and most natural stone floors.
• Full bead elastic product gives excellent sound deadening/acoustic properties
• Odourless
• Excellent gap filling properties for uneven surfaces.

PREPARATION AND APPLICATION

The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants. Existing floors must be free from all polish/wax. Prime/stabilise friable concrete/anhydrite and floors with residual adhesive with G91 Primer before application.

Subject to recommendations made by the flooring manufacturer, subfloors should be subject to 28 days of maturing and should have a maximum of 3% moisture content or 70% equilibrium relative humidity before using this adhesive. The room in which the floor is being installed should be in excess of 15°C and register an ambient humidity between 40% and 70% while the adhesive is being used. For moisture contents between 3.1% and 7%, or over 70% relative humidity, a suitable primer and moisture barrier should be used. Do not use this adhesive above these recommendations. Very porous or friable surfaces should first be primed with G91 Primer and allowed to dry. Under floor heating must be turned off 48 hours before and 48 hours after the adhesive has been applied.

It is extremely important to monitor ambient conditions throughout installation, as any change in these conditions could cause issues such as condensation, which could directly impact the success of the bond even though the substrate reading may appear correct.

FLOORING: the parquet flooring MUST be acclimatized for several days in the room where it is to be installed. Leave in original packaging during this period.

All installations and sub floor preparations must be carried out in line with the relevant British or international standards. When using the G1 applicator, insert sachet into the G1 barrel and cut tip of sachet. Fix nozzle head to barrel and follow instructions set out in G1 Instruction Manual.

Position blocks/planks whilst adhesive is still tacky (within 30mins) and tap into final position with mallet and block, removing uncured adhesive with cleaning wipes. (Caution - test compatibility with lacquer finished block first).

One 3ltr sachet will bond up to 6 square metres when applied as directed.

Handling and Storage

Clean machines, equipment and tools with white spirit before the adhesive dries.

Woodstikk® 10 should be stored in the original sachets cool, dry conditions between 15°C and 30°C. Ensure good ventilation. In these conditions it has a storage life of 9 months. Storage outside these parameters will dramatically reduce shelf life. Opened sachets must be closed airtight and used up as soon as possible (within 1 month).