Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
Brislington
Bristol
BS4 5JJ

+44 (0)117 971 1364
sales@thenamethatsticks.com

Woodstikk 20 Wood Flooring Adhesive

Woodstikk 20 is a solvent and water free adhesive specifically designed for fixing all types of wooden floors directly onto all common substrates, eliminating the need for battens.

Find a stockist

This product is supplied by our valued stockists. To find one near you, please click the button below.

Find a stockist

Need help?

Call us on +44 (0)117 971 1364 or click the button below.

Request a call

PRODUCT OVERVIEW

Woodstikk 20 is a solvent and water free adhesive specifically designed for fixing all types of wooden floors directly onto all common substrates, eliminating the need for battens.   Woodstikk 20 is dispensed via a sachet adhesive gun dispenser

Woodstikk 20 is based on the latest developments in hybrid polymer technology.

SIZES AVAILABLE

600ml sachet (coverage 1 square metre per sachet)

 

PREPARATION AND APPLICATION

The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants. Existing floors must be free from all polish/wax. Prime/stabilise friable concrete/anhydrite and floors with residual adhesive with a suitable primer before application. New concrete must be allowed 4 weeks to dry and mature.  Always check moisture level of subfloor if moisture levels in subfloor are above those recommended by the flooring manufacturer, damp proof the floor with a suitable primer as directed. Chipboard must be free of release agents/wax.  Very porous or friable surfaces should first be primed with a suitable primer and allowed to dry. Basement/below ground floors must be adequately protected with a D.P.C and two coats with a suitable primer applied as directed. Under floor heating must be turned off 48 hours before and 48 hours after the adhesive has been applied.

Subfloors should be subject to 28 days of maturing and should have a maximum of 3% moisture content, or 70% relative humidity, before using this adhesive. For moisture contents between 3.1% and 7%, or over 70% relative humidity, a suitable primer and moisture barrier should be used. Do not use this adhesive above these recommendations.

FLOORING: the parquet flooring MUST be acclimatized for several days in the room where it is to be installed. Leave in original packaging during this period.

All installations and sub floor preparations must be carried out in line with the relevant British or international standards.  Insert sachet into the gun and cut tip of sachet.  Fix nozzle head to barrel and dispense an even bead.

Position blocks/planks whilst adhesive is still tacky (within 30mins) and tap into final position with mallet and block, removing uncured adhesive with cleaning wipes. (Caution - test compatibility with lacquer finished block first)

Handling and Storage

Clean machines, equipment and tools with white spirit before the adhesive dries.

Woodstikk 20 should be stored in the original sachets cool, dry conditions between 15°C and 30°C. Ensure good ventilation.  In these conditions it has a storage life of 9 months.   Storage outside these parameters will dramatically reduce shelf life. Opened sachets must be closed airtight and used up as soon as possible (within 1 month).

 

Reviews

There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Click the button above to ask a question.

Downloads

PDF

Woodstikk 20 Technical Data Sheet

pdf

Download

Savings Calculator

Use our adhesive time and cost calculator to find out how much time and money you could save.

Total Saving£404.6711.93%
Existing System

How do we calculate this?

Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us+44 (0)117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.