Woodstikk 20 MS Polymer Wood Flooring Adhesive

PRODUCT OVERVIEW

Woodstikk 20 is a solvent and water free adhesive specifically designed for fixing all types of wooden floors directly onto all common substrates, eliminating the need for battens.   Woodstikk 20 is dispensed via a sachet adhesive gun dispenser

Woodstikk 20 is based on the latest developments in hybrid polymer technology.

SIZES AVAILABLE

600ml sachet (coverage up to 1 square metre per sachet)

Featured Properties

• Hybrid polymer based
• Solvent free
• Water free
• Free from isocyanates
• Easy to apply
• Remains permanently elastic
• High final bond strength
• Compatible with underfloor heating

PREPARATION AND APPLICATION

The surfaces to be glued must be sound, clean, dry and free from dust, grease and other contaminants. Existing floors must be free from all polish/wax. Prime/stabilise friable concrete/anhydrite and floors with residual adhesive with a suitable primer before application. New concrete must be allowed 4 weeks to dry and mature.  Always check moisture level of subfloor if moisture levels in subfloor are above those recommended by the flooring manufacturer, damp proof the floor with a suitable primer as directed. Chipboard must be free of release agents/wax.  Very porous or friable surfaces should first be primed with a suitable primer and allowed to dry. Basement/below ground floors must be adequately protected with a D.P.C and two coats with a suitable primer applied as directed. Under floor heating must be turned off 48 hours before and 48 hours after the adhesive has been applied.

Subfloors should be subject to 28 days of maturing and should have a maximum of 3% moisture content, or 70% relative humidity, before using this adhesive. For moisture contents between 3.1% and 7%, or over 70% relative humidity, a suitable primer and moisture barrier should be used. Do not use this adhesive above these recommendations.

FLOORING: the parquet flooring MUST be acclimatized for several days in the room where it is to be installed. Leave in original packaging during this period.

All installations and sub floor preparations must be carried out in line with the relevant British or international standards.  Insert sachet into the gun and cut tip of sachet.  Fix nozzle head to barrel and dispense an even bead.

Position blocks/planks whilst adhesive is still tacky (within 30mins) and tap into final position with mallet and block, removing uncured adhesive with cleaning wipes. (Caution - test compatibility with lacquer finished block first)

Handling and Storage

Clean machines, equipment and tools with white spirit before the adhesive dries.

Woodstikk 20 should be stored in the original sachets cool, dry conditions between 15°C and 30°C. Ensure good ventilation.  In these conditions it has a storage life of 9 months.   Storage outside these parameters will dramatically reduce shelf life. Opened sachets must be closed airtight and used up as soon as possible (within 1 month).