Woodstikk MUF Structural Weatherproof Adhesive

PRODUCT OVERVIEW

Woodstikk MUF Structural Weatherproof Adhesive System is a two-component clear liquid melamine-urea resin adhesive, which gives a fully weatherproof and structural bond.  This system is commonly used for the manufacture of glued laminated timber structures and for finger-jointing but is also well suited for a number of other bonding operations. It can be used for hot and cold bonding and for bonding under radio frequency glue line heating conditions.

Woodstikk MUF has low formaldehyde content and therefore offers the possibility to maintain a healthy working environment and at the same time achieve glue bonds exhibiting minimal formaldehyde emissions. The glue lines are light-coloured and do not darken over time.

When the gluing is carried out in accordance with the instructions in this Technical Data Sheet, Woodstikk MUF Structural Weatherproof Adhesive  gives water and weatherproof, gap-filling bond, and conforms to Adhesive Type I of the European standards for adhesives for load-bearing structures (EN 301 and EN 302)

WOODSTIKK MUF IS FROM THE PREFERE ADHESIVE RANGE.

Featured Properties

• Cures to give an opaque glueline
• Meets requirements of EN301 and EN302 Tyoe I
• High bond strength
• Water resistant
• Can be hot or cold cured
• Cures with radio frequency equipment

SIZES AVAILABLE

• 1.2kg kit (covers 8 square metres)
• 6kg kit (covers 40 square metres)
• 12kg kit (covers 88 square metres)
• 30kg kit (covers 200 square metres)

PREPARATION AND APPLICATION

Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.

Wood, plywood, laminated plastics should be of uniform thickness.

Woodstikk MUF Resin (part A) should be mixed with Woodstikk MUF Hardener (part B) – refer to technical data sheet for correct mixing ratios and application data.

HANDLING AND STORAGE

Store in the original containers in a cool, dry place, at a temperature range of between 5°C and 10°C.