Ureka Global Ltd
(formerly Alansons Industries Ltd)
7 Flowers Hill
Brislington
Bristol
BS4 5JJ

+44 (0)117 971 1364
sales@thenamethatsticks.com

Woodstikk PU Gel D4 Polyurethane adhesive

Woodstikk PU D4 Gel is a one part, cartridge-loaded, solvent free, fast setting, moisture curing polyurethane, thixotropic gel.

Add to Basket
Coverage Calculator
Available for deliverySpend £400.00 to get free delivery.

Order a Sample

Click the button below, fill in your details and we’ll put it in the post.

Order a Sample

Need help?

Call us on +44 (0)117 971 1364 or click the button below.

Request a call

PRODUCT OVERVIEW

 Woodstikk PU Gel has been formulated for high performance water-resistant bonds between a wide range of materials.

The thixotropic nature of the gel prevents slumping and gives a level of gap filling to the bond. Woodstikk PU Gel has excellent adhesion to wood, chipboard, polyurethane, mineral wool, concrete, stone, bricks, gypsum boards and all traditional porous substrates and van be used in a wide range of bonding applications. Woodstikk PU Gel is ideal for all types of wood bonding and joinery, bonding wooden constructions, boats, jointing sandwich panels, and insulation as well as many other applications.

featured properties

  • Non-slumping, ready to use, gel
  • Solvent free
  • Totally non flammable
  • Fully waterproof to EN 204 D4
  • High performance bonds between a wide range of materials
  • Excellent weathering and aging properties
  • Foams slightly to fill gaps
  • Excellent chemical resistance

PREPARATION AND APPLICATION

At least one of the surfaces to be bonded must be porous and ensure surfaces are always clamped during cure.

Firstly cut tip of the cartridge and screw on the nozzle. Cut nozzle to an angle of 45 degrees. Apply the adhesive, using a standard cartridge gun, to one of the surfaces to be bonded and assemble the bond immediately (within 5 minutes). Apply pressure to the bond, by means of a clamp. The product will foam slightly on application to fill any small gaps. Clean away any excess adhesive immediately.

Under normal conditions the gel will skin over after approximately 5 minutes and give a handleable cure within 10 minutes and final bond strength acheived in 12 hours.

Handling and Storage

The product should be stored unopened in a dry condition at a temperature of 10 - 25°C. This will ensure the stated shelf-life of 12 months. The adhesive will have a limited life once the container is opened.

Reviews

There are no reviews for this product.

Average Rating

Not enough reviews

Questions & AnswersQ&A's

Click the button above to ask a question.

Coverage Calculator

Use our coverage calculator to find out how much you need for your project.

Based on your length in metres:

litres of Woodstikk PU Gel D4 Polyurethane adhesive.

Including 10% wastage.

How do we calculate this?

1 Litre of Woodstikk PU Gel D4 Polyurethane adhesive covers 115 metres with a bead diameter of 3mm. You require enough product to cover metres including 10% wastage. m / 115m per Litre = Litres of product.

Calculate Coverage

Coverage Calculator

Use our coverage calculator to find out how much you need for your project.

Based on your length in metres:

litres of Woodstikk PU Gel D4 Polyurethane adhesive.

Including 10% wastage.

How do we calculate this?

1 Litre of Woodstikk PU Gel D4 Polyurethane adhesive covers 115 metres with a bead diameter of 3mm. You require enough product to cover metres including 10% wastage. m / 115m per Litre = Litres of product.

Calculate Coverage

Let’s get stuck in.

Got an adhesives problem? Let our sticky smarts work for you.

Call us+44 (0)117 971 1364

Email ussales@thenamethatsticks.com

Get how-to advice, industry news and new innovations — straight to your inbox.