Woodstikk® UF Veneering Adhesive Systems can be used for all veneering and laminating work, whether it is cold press, hot press or form pressing the liquid/powder combination is the most versatile resin system for any workshop.
Woodstikk® UF Veneering Adhesive systems are used for small assembly, veneering and laminating applications in the timber processing and furniture industry.
This system incorporates a liquid resin and a powder hardener which are mixed together and then applied to the substrates to be bonded. The Fast Curing Winter grade is ideal for colder environments or for where a faster cure time is needed.
This system is suitable for use in a variety of assembly applications, and in conjunction with low-voltage or radio-frequency heating, for lipping and edge-banding.
This system mees the requirements of BS 1203 (type MR), BS 1204: Part 2 (Type MR) and BS EN 12765 (Class C3).
Ensure that the surfaces to be bonded are smooth, clean and free from dust or other deposits.
Wood, plywood, laminated plastics should be of uniform thickness.
The resin should be mixed with the hardener and then applied to the substrate to be bonded. Refer to technical data sheet for correct mixing ratios and application procedures.
Store in the original containers in a cool, dry place, at a temperature range of between 5°C and 30°C.
Click the button above to ask a question.
Woodstikk PRF Structural Weatherproof Adhesive is a two component phenol resorcinol adhesive which gives a fire resistant, structural and fully weatherproof bond.
Woodstikk® UF Veneering Adhesive Systems can be used for all veneering and laminating work. The Slow Curing Summer Grade is ideal for warmer environments or for a slower cure time requirement.
Woodstikk® UF Veneering Adhesive Systems can be used for all veneering and laminating work. The Hot Press Bonding Grade is ideal for use with hot platen presses and gives and all day pot life.